Developing magnetic roller

    Purpose

    The developing magnet roller is an important part of the toner. The permanent magnetic core does not rotate, and its function is to use magnetism to attract toner to the surface of the magnetic roller. The surface of the magnetic roller is sandblasted or drawn with a full circle of hundreds of axial shallow grooves to form electrical cavities with the toner scraper to facilitate toner transfer. When the magnetic roller loaded with toner rotates out of the position of the scraper, the toner on the surface of the magnetic roller is not only charged, but due to the force of the magnetic field, it forms a "magnetic spike", that is, a "toner mist". ;, Apply a bias to the outer sleeve of the magnetic roller, so that the magnetic spikes are arranged in an orderly manner. The function of the magnetic roller "spacer" is to control the effective attraction distance between the magnetic spike on the surface of the magnetic roller and the photosensitive drum, which is beneficial to improve the toner "bounce imaging".

    Composition

    It is mainly composed of an inner magnetic core, an outer sleeve, and flanges at both ends.

    Typical process

    1. Magnetic block: plastic injection molding, magnetic alignment molding-magnetic block dewatering port-demagnetization -Cut off both ends of the magnetic block-Heat treatment-Straighten (complete to be assembled);

    2. Axle core: Steel rod is formed and cut off on a cam lathe-Both ends are cut and ground Processing-milling-surface plating (completed to be assembled);

    3. Flange: aluminum alloy is cut off on a cam lathe-forging forming-shaft end CNC turning processing-mating end CNC turning processing-flat milling-ultrasonic cleaning-pressing in the copper sleeve (completed to be assembled);

    4.1 Casing: aluminum alloy round pipe fine drawing-cutting-CNC at both ends Turning-CNC surface turning-ultrasonic cleaning-surface sandblasting-laser machine inspection (completed to be assembled);

    4.2 Casing: aluminum alloy grooved tube fine drawing-cutting-two End CNC turning-ultrasonic cleaning-laser machine inspection (completed to be assembled);

    4.3 Casing: stainless steel pipe welding-cutting-outer diameter rough grinding-both ends CNC turning- Outer diameter fine grinding-ultrasonic cleaning-surface sandblasting-laser machine inspection (complete to be assembled);

    5. Magnetic core: Coating glue-magnetic on the middle part of the shaft core Put the block and the shaft core into the mold and compact it-put it into the mold and magnetize-magnetic test (complete to be assembled)

    6. Finished product: the magnetic core is put into the sleeve -Coat glue on the matching parts of the flanges at both ends-Press the flanges at both ends into the sleeve-Wipe the overflowing glue-Conduction check-Batch number printing-Laser machine detection-Roll wax paper protection.